Frequently asked questions

At this time this hasn't been tried. If that changes we will update this answer. Our best suggestion is to talk it over with your dealer. It may be possible to order your tractor with the AutoConnect lift and not have the CommandCut actuator and controls included. We're entirely open to shipping our product to your dealer for installation. We would recommend trying to negotiate a price at least $1,500 lower than if you bought the tractor with the electric actuator as the actuator, controller and rotary height setting switch retail for more than that according to online parts sources.

No. You will need at least one hydraulic SCV (Selective Control Valve) circuit to connect to. This would have to be accomplished by adding loader controls, at least one rear remote, or a custom SCV of your choosing.

Absolutely. The original functionality of having the loader, the mower deck and even a three point lift attachment all mounted at the same time remains. If you are using a loader hydraulic circuit to control the HydrauliCut lift cylinder it is recommended to use the bucket circuit or OEM 3rd function coupler connections and not the loader lift circuit. When utilizing the loader hydraulic circuits a nice enhancement (but not required) would be to add a hydraulic diverter valve.

Absolutely not. The HydrauliCut lift system is a direct replacement fit for the OEM electric linear actuator. Follow the step-by-step installation instructions and you'll be on your way.

This is to regulate the lifting and lowering of your mower deck to a reasonable speed very similar to that of the OEM electric linear actuator. If the restrictors were not used you would likely experience a "slamming" up/down of your deck at high throttle settings.

Please communicate with us and we will come to a solution together. We can either build your kit with your specifically directed coupler type or we can build your kit without hydraulic couplers.

You should buy the custom kit as this will require custom hydraulic hose lengths based on where your non-OEM 3rd function, diverter, multiplier or rear remote ports are mounted.